Mala Švarča 155, 47 000 Karlovac, Republic of Croatia
Joint stock company for production of diesel engines and equipment for power plants.
ADRIADIESEL is a factory for production of diesel engines, spare parts and other power equipment, and it also provides services in overhauls, machining and heat treatment..
The company is equipped with machinery for production of four-stroke diesel engines produced according to Licence Agreement with MAN Diesel SE, including the test bed.
Annual capacities are 220 000 hrs; 100 000 hours in machining, 10 000 hrs in heat treatment, 60 000 hrs in locksmith-piping-welding works and 50 000 hrs in assembly.
Despite changes in ownership and production program, Adriadiesel d.d. still follows the tradition of the former Yugoturbina Diesel Engine Factory.
In 2001 Adriadiesel d.d. was certified according to ISO 9002;1994 norm by Det Norske Veriats Classification Society. - Price and delivery terms are negotiable, but quality is NOT!
Satisfied customer is the best estimate of our work, and frequent surveys are being made in order to gain information of their level of satisfaction.
Adriadiesel complies with all requirements and law regulations on environment protection. Dangerous technological waste is very carefully managed, and special attention is paid to prevention of water and air polution.!
MAN Diesel SE engines features:a availability, reliability, durability, low operation costs, low maintenance requirements and fuel oil and lub consumption.
MAN Diesel SE Diesel Engines: long intervals between regular overhauls and long lifetime of components, compliance with environmental requirements!
Adriadiesel produces spare parts for all MAN Diesel SE licensed engine types in our production program and spare and substitute parts for Sulzer licensed engines produced since 1955
There are no translations available.

Od 1998. ne rade se novogradnje po licenciji SULZER, ali se nastavlja s proizvodnjom rezervnih dijelova za sve navedene tipove dizelskih motora, kao i s remontima i servisima.
All parts are ordered by the Code Book according to Code Number, with which the parts are marked.
General overhauls, repairs and servicing can be carried out on spot or in our factory, where engines are tested on our test bed.
The company is equipped with machinery for production of four-stroke diesel engines produced according to Licence Agreement with MAN Diesel SE, including the test bed.
Welding and Locksmith Works

Welding

options:
welded constructions
materials:
steels
thickness:
to 150 mm
construction weights:
to 25.000 kg
welding methods:
MIG
MAG
REL
TIG

CNC Gas Cutting - CNC Z 32 Control Unit

control unit:
CNC Z 32
width:
4.000 mm
lenght:
12.000 mm
effective cut width:
3.000 mm
effective cut lenght:
10.000 mm
max. cut thickness:
200 mm

Shotpeening Chamber - ZERO BNP 721

use of the following abrasive materials:
steel shot
shot beads up to 600 ľm
corundum
glass beads
extremely fine and light materials
chamber working area:
1.700 x 1.700 x 1.500 mm
rotating table:
1.200 mm
chamber working pressure:
0,15 - 7,00 bar
abrasive material:
steel beads - S 170

 

View catalogue (Flash)

General Catalogue

Diesel Engines

Spare Parts

Services


Remark: install Adobe Flash Player on your computer. Download installation file from here:: Adobe Flash Player.


 

Locksmith and welding works

Welding


Adriadiesel d.d. web pages :: Welding


CNC Gas Cutting - CNC Z 32 control unit


Adriadiesel d.d. web pages :: CNC Gas Cutting - CNC Z 32 control unit


Shotpeening Chamber - Zero Bnp 721


Adriadiesel d.d. web pages :: Shotpeening Chamber - Zero Bnp 721